BLE V4.2 Module, RTLS, GATT, RS232, RS48 (藍牙BLE V4.2模組, IPEX天線)

藍牙BLE V4.2模組, IPEX天線
BLE V4.2 Module
藍牙BLE V4.2模組, IPEX天線
藍牙BLE V4.2模組, IPEX天線
IPEX, Chip, RF-Out antenna
  • 轉寄
刊登者: 桃園市中壢區-華成資通台灣黃頁VIP優質會員全部產品:35  

Bluetooth BLE V4.2 single mode module

多天線: IPEX, Chip, RF-Out (擇一)



Computer peripherals and I/O devices



Multi-touch trackpad

Interactive entertainment devices

Remote control

3D Glasses

Gaming controller

Personal Area Networks

Health/fitness sensor and monitor devices

Medical devices

Key-fobs + wrist watch

Remote control toys



■ Bluetooth 4.2 qualified single-mode module

■ Module size: 14.52 mm ×19.20 mm × 2.00 mm

■ 256-KB flash memory, 32-KB SRAM memory

■ Industrial temperature range: –40 °C to +85 °C

■ Antenna: Chip (default), U.FL or RF-out (Option)

■ Support capacitive sensors for buttons or sliders

■ Bluetooth Low Energy protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles

■ Switches between Central and Peripheral roles on-the-go


Power Consumption

■ TX output power: –18 dbm to +3 dbm

■ Received signal strength indicator (RSSI) with 1-dB resolution

■ TX current consumption of 15.6 mA (radio only, 0 dbm)

■ RX current consumption of 16.4 mA (radio only)

■ Low-power mode support

❐ Deep Sleep: 1.3 μA with watch crystal oscillator (WCO) on

❐ Hibernate: 150 nA with SRAM retention

❐ Stop: 60 nA with XRES wakeup



UUID_180A_SERV = UUID.fromString("0000180A-0000-1000-8000-00805F9B34FB"),

UUID_180A_VER  = UUID.fromString("00002A26-0000-1000-8000-00805F9B34FB"),//x.x.x(ASCII/read only)

UUID_NOTIFY= UUID.fromString("00002902-0000-1000-8000-00805F9B34FB"),//20byte

UUID_BLE_SERV= UUID.fromString("0003ABCD-0000-1000-8000-00805F9B0131"),

UUID_BLE_DATA= UUID.fromString("00031234-0000-1000-8000-00805F9B0130"),

UUID_BLE_SENT= UUID.fromString("00031234-0000-1000-8000-00805F9B0131"),//20byte

UUID_BLE_CONF= UUID.fromString("00031234-0000-1000-8000-00805F9B0132");//5byte


RF Current Specifications:

Receive current in normal mode: 18.7 mA (Typical)

RF Radio receive current in normal mode: 16.4 mA(Typical) Measured at VDDR

HIGHGAIN Receive current in high-gain mode: 21.5 mA(Typical)

TX current at 3-dBm setting (PA10): 20 mA(Typical)

TX current at 0-dBm setting (PA7): 16.5 mA(Typical)

Radio TX current at 0 dBm setting (PA7): 15.6 mA(Typical) Measured at VDDR

Radio TX current at 0 dBm excluding Balun loss: 14.2 mA(Typical) Guaranteed by design simulation

TX current at –3-dBm setting (PA4): 15.5 mA(Typical)

TX current at –6-dBm setting (PA3): 14.5 mA(Typical)

TX current at –12-dBm setting (PA2): 13.2 mA(Typical)

TX current at –18-dBm setting (PA1): 12.5 mA(Typical)

Average current at 1-second BLE connection interval: 18.9 – μA(Typical), TXP: 0 dBm; ±20-ppm, master and slave clock, accuracy. For empty PDU exchange

Average current at 4-second BLE connection interval: 6.25 μA(Typical), TXP: 0 dBm; ±20-ppm master and slave clock accuracy. For empty PDU exchange


RSSI Specifications:

RSSI accuracy: ±5 dB(Typical)

RSSI resolution: 1 dB(Typical)

RSSI sample period: 6 μs(Typical)


RF Performance Characteristics:

RF output power on ANT: –18(min.), 3 dBm(Max.), (Configurable via register settings)

RF receive sensitivity on ANT: –87 dBm (Typical)

Module frequency range: 2400 ~ 2480 MHz

Peak gain: 0.5 dBi

Average gain: –0.5 dBi

Return loss: –10.5 dB

Channel spacing: 2 MHz (Typical)

On-air data rate: 1000 kbps (Typical)

BLE.IDLE to BLE. TX transition time: 120μs (Typical), 140 μs(Max.)

BLE.IDLE to BLE. RX transition time – 75μs (Typical), 120 μs(Max.)


回  應



  • WeB66會員:台灣黃頁VIP優質會員
  • WeB66價值度:7.3
  • 所在地:桃園市
  • 電話:**********
  • 詳細資料



  • [連絡_業務合作]BLE 4.2 需求 09/14
  • [產品_詢價]產品名稱:WA-232C 需求... 07/16
  • [產品_詢價]產品名稱:無線網路WiFi RS... 04/05
  • [產品_詢價]產品名稱:你好 我需要的轉換器規... 01/20
  • [連絡_詢價](維修需求)(購買需求)【紅外線... 12/20
找產品(35) |
找服務(3) |