您的瀏覽器不支援JavaScript功能,您可以開啟JavaScript
桃園縣,新竹縣市,苗栗縣推薦優良廠商

The Newest Type of Interior Screw Concre (新式內牙型金屬膨脹螺絲)

新式內牙型金屬膨脹螺絲
新式內牙型金屬膨脹螺絲
新式內牙型金屬膨脹螺絲
本公司產品型態
  • 轉寄
立即詢價
單價:請詢價
點閱:2045
型號/編號:新式內牙型金屬膨脹螺絲
刊登者: 桃園市新屋區-立川工業全部產品:2  

產     品     特     性
1:適用性廣泛- 功能性完整的單一母工件,只要公件螺紋尺寸符合,適合任何形式螺栓頭型 web66
2:施工法選擇- 可依需求採定點預置,或於單一施工補行鑽孔再打(裝)入,其功能與成效完全一致
3:高施工成功率- 植入式內牙母工件,没有孔配深度著附及鑽孔傾斜困擾,不需專業性施工技巧
4:高抗拉設計- 工件全牙式錐度擴張特殊倒掛勾設計,抗拉及荷重值優於傳統市售產品
5:保證膨脹擴張- 板製產品,專利全牙式錐度擴張設計,抓扣能力強不空轉,不需專業性施工技巧
6:鎖付防鬆功效- 全牙式錐度擴張特殊設計,利用反向推力效應緊迫鎖入工件
7:棄置無困擾- 錯置或捨棄不用,只要退出螺栓公件,塗抹填補劑回復平面,無切除困擾及突出物碰擊危險
8:完善設計思考- 配套泛用的市售制式螺絲,專業施工達成率100%零件,DIY工事如意的容易施工配件

Product characteristics
1:Broad Application: As long as the size of male fastener is conformed to the single female fastener, it will work, and it is applicable to any kind of bolt head. 
2:The Choice of Approach: Pinpoint preload is adopted by demands, or it can be installed after drilling a hole. The function and effectiveness are completely unanimous.
3:High Success Rate: Inserting interior screw workpieces has no problem in recess fill and sloping while drilling, and the successful drive-in rate is 100%.
4:High Tensile Resistant Design: The tensile strength and loading of full screws and special taper expansion undercut design are better than those traditional products in the market.
5:Guaranteed Expansion: Metal plate-made product, patented design of full-thread cone shaped expansion with excellent capacity of grabbing concrete walls. No idle running will occur, and it is easy-to-use for everyone.
6:Locking Performance: Special design of full-thread cone shaped expansion, utilizing the reverse thrust effect to lock the workpiece tightly.
7:Can be Abandoned Easily: If it is misplaced or considered useless, try to remove the male bolting part and use make-up solution to smooth the surface, which will not result in any danger of cutting or protrusion.
8:Complete Design: The product is shorter and more precise than the same product as compared with other companies. Used with the commonly seen fasteners in the market. It is the best choice and easy-to-use 
      part for "DIY work".

檔案下載圖示檔案下載:立川工業產品目錄
立即詢價

回  應

 
留 言 者內  容
  • 煒盛 李添誠
  • 請提供報價第一批為7000支第二批4000~8000支以上M10規格SUS3042"長請於101年05月30日前提供報價詢價確認後會要求提供型錄與相關文件作為公共工程送審使用
 立川工業
李先生你好: 目前SUS尚在測試階段,目前未對外販售,目前只有鐵鍍鋅或以其他表面處理方式代替,你可於上班時間撥電話詢問:03-4766999或MAIL:li.chuan11@msa.hinet.net。謝謝!!
刪除
 
  • 和興工程行
  • 3分內牙壁虎1千支價格多少?
 立川工業
< 此訊息為私密回覆 >
刪除
 
社群分享

刊登者:立川工業

  • WeB66會員:一般會員
  • WeB66價值度:4.3
  • 所在地:桃園市
  • 聯絡人:戴小姐
  • 電話:**********
  • 詳細資料

最新刊登

回應總覽

看全部>>
  • [連絡_詢價]RFQ IC CHIP 12/04
  • [連絡_詢價]堅果和蔬果脆片類報價 11/06
  • [連絡_詢價]電子零件采銷 10/23
  • [連絡_詢價]成人尿布及嬰兒尿布 10/12
  • [連絡_詢價]運動用品批發 09/09
全部訊息:
找產品(2) |
找服務(4) |
產業文章(1)
賣家- 搶商機
鑄造用鉻鐵礦砂(46報價產品名稱:鉻鐵礦砂需求數量:1單號-295046|0086180****|***@**ail.com
尋找長期配合中彰投標報價產品名稱:標線需求數量:產品規單號-295646|097096****|***@**hoo.com.tw
201312camr報價詢價需求201312camry單號-296183|093671****|***@**ail.com
搶商機

相關產品