服務
  • 服務
  • 產品
  • 報價
相關廠商/供應商
  • 活全機器
首頁/科毅科技/光罩對準曝光機
科毅科技股份有限公司
科毅科技股份有限公司
加入時間:2009-04-08資本額:13858萬
瀏覽次數:1992by:科毅科技

光罩對準曝光機

AG Mask Aligner Specification Light Source: NUV/DUV light source: 350W, 500W, 1000W. 2KW, 5 KW

AG Mask Aligner Specification Light Source: NUV/DUV light source: 350W, 500W, 1000W. 2KW, 5 KW, 8KW Exposure area :4”,6”, 8”, 10”, 12”or larger (up to 24”) Wavelength: NUV (included 365nm, 400nm, 436nm.), DUV (220nm, 254nm...etc.) Uniformity: ±1~3% to ± 5% Power supply: Two Channels (Channel A/B) with CI/CP mode  Regular (CP: Constant Power) and/or Intensity Control (CI: Constant Intensity & CP) type Image (Microscope) system: Dual CCD Camera Alignment System : 50X-300X , 90X-600X , 180X~1200x or 250X-1500X Lens Tubes with Video zoom magnification B & W (or Color) Monitors: 9”, 12”, 14”, 17” Ring illumination: (2-separate fiber rings), adjustable fiber optic illuminators, Camera separation range : less ring illuminators 4.3cm~ 20 cm (option with Prism could be smaller to 10cm) Camera Purge hood could be option – prevent particle Single field or Split filed Microscope option is available. Alignment Fixture: Mask vacuum chuck: 4”, 5”, 7”, 9” or Larger (either top or bottom load are all available) Wafer(substrate) vacuum chuck: round or Square 2”, 4”, 6” 8”, Larger all with multi substrate and pre-alignment pin Mask , Wafer Auto leveling (planarize ) function Adjustable Vacuum pressure With Proximity, Hard , Soft Contact mode X,Y axis adjustment range: 12mm with resolution 1um (Option 0.1um) Θ axis adjustment range: ±3° in Theta with 0.0001° increment Z axis adjustment range: 6mm, resolution 1um Manual or Auto (option) Load unload wafer (substrate) N2 purge in between the wafer and mask and wafer. UV expose and the Nano imprint aspect ratio can be 10:1 with 300 um thickness PR (option item). Operation system: PLC or computer with Touch panel control interface, plus the operator control switch box. Pneumatics & electronics valve control system Timer: 0.1-999 sec / Emergency StopMask Vacuum : 0~ 25” Hg Wafer Vacuum: 0~ 25” Hg Auto leveling in between Mask vs. substrate Auto Z axis: auto gape adjustment—only input the gape value in between mask and wafer—i.e. 100um, then optical encoder and step motor system will automatically do the leveling and also gape tuning. System power (light source, illuminator, power supply ,) integrate at same panel Control the Nano Imprint pressure by motor and also Air Cylinder (option item). Vibration proof table (option): 1)Integrate 4 vibration pads with Al. or SUS frame to support Aligner 2) Option with the granite plate for Vibration isolation is available. 3) Integrate TMC or New Port vibration proof table with Aligner - Could integrate auto light shutter Performance: Production speed : 2~4 pcs/minutes With Vacuum hard contact: the printing resolution could be from 1.0 (NUV) and 0.5um (DUV) With proximity mode: the printing resolution is 2~5um] Other then Standard system, We could build up Customized system for you!!

科毅科技

公司位置:桃園市-楊梅區
統一編號:27285346
聯絡人:林憲維
電話:
手機:
服務時間:每週一到週五 08:30AM-18:00PM
免費咨詢公司介紹

相關產品

相關詢價

我想詢問一下 10KG鑄鐵砝碼鎖型的 以及1KG不鏽鋼砝碼F1等級

來自:粟OO份OO公O 詢價

***isticstw@awanofood.com

Cat6 UTP 23AWG , 華新麗華、大同 網路線整箱費用

來自:莊OO 詢價

***ang413051@gmail.com

詢價:選擇開關R3SNS-2FE-1A 數量250個

來自:億OO合OO股OO限OO 詢價

***ena.wu@nienmade.com.tw

https://terminalblock.web66.com.tw/web/NMD?postId=542462享曆 TD-025 雙層式端子台

TD-025 雙層式端子台 電流:25安培 電壓:600伏特 外觀尺寸:42*50*50mm 適用導線:6mm2/AWG10 螺絲大小:M4

產品詢價與合作洽詢

嗨,想詢價或有問題都可以直接寫在下面,不用寫得很正式,我們看得懂就好,留下聯絡方式後,我們會盡快回覆你
驗證碼圖片驗證碼圖片驗證碼圖片驗證碼圖片
為避免垃圾訊息,請協助輸入驗證碼,謝謝您的耐心
To:
科毅科技股份有限公司

聯絡人:林**

Email:r******@mrnanotec.com

關鍵字:

#光罩對準曝光機#導體曝光機#平行曝光機#曝光機#曝光機原理#曝光機平行光
填寫詢價單