科毅科技股份有限公司
加入時間:2009-04-08資本額:13859萬
瀏覽次數:1625by:科毅科技
光罩對準曝光機
AG Mask Aligner Specification Light Source: NUV/DUV light source: 350W, 500W, 1000W. 2KW, 5 KW
AG Mask Aligner Specification
Light Source:
NUV/DUV light source: 350W, 500W, 1000W. 2KW, 5 KW, 8KW
Exposure area :4”,6”, 8”, 10”, 12”or larger (up to 24”)
Wavelength: NUV (included 365nm, 400nm, 436nm.), DUV (220nm, 254nm...etc.)
Uniformity: ±1~3% to ± 5%
Power supply:
Two Channels (Channel A/B) with CI/CP mode
Regular (CP: Constant Power) and/or Intensity Control (CI: Constant Intensity & CP) type Image (Microscope) system:
Dual CCD Camera Alignment System : 50X-300X , 90X-600X , 180X~1200x or 250X-1500X
Lens Tubes with Video zoom magnification
B & W (or Color) Monitors: 9”, 12”, 14”, 17”
Ring illumination:
(2-separate fiber rings), adjustable fiber optic illuminators,
Camera separation range : less ring illuminators 4.3cm~ 20 cm (option with Prism could be smaller to 10cm)
Camera Purge hood could be option – prevent particle
Single field or Split filed Microscope option is available.
Alignment Fixture:
Mask vacuum chuck: 4”, 5”, 7”, 9” or Larger (either top or bottom load are all available)
Wafer(substrate) vacuum chuck:
round or Square 2”, 4”, 6” 8”, Larger all with multi substrate and pre-alignment pin
Mask , Wafer Auto leveling (planarize ) function
Adjustable Vacuum pressure
With Proximity, Hard , Soft Contact mode
X,Y axis adjustment range: 12mm with resolution 1um (Option 0.1um)
Θ axis adjustment range: ±3° in Theta with 0.0001° increment
Z axis adjustment range: 6mm, resolution 1um
Manual or Auto (option) Load unload wafer (substrate)
N2 purge in between the wafer and mask and wafer.
UV expose and the Nano imprint aspect ratio can be 10:1 with 300 um thickness PR (option item).
Operation system:
PLC or computer with Touch panel control interface, plus the operator control switch box.
Pneumatics & electronics valve control system
Timer: 0.1-999 sec / Emergency StopMask Vacuum : 0~ 25” Hg
Wafer Vacuum: 0~ 25” Hg
Auto leveling in between Mask vs. substrate
Auto Z axis: auto gape adjustment—only input the gape value in between mask and wafer—i.e. 100um, then optical encoder and step motor system will automatically do the leveling and also gape tuning.
System power (light source, illuminator, power supply ,) integrate at same panel
Control the Nano Imprint pressure by motor and also Air Cylinder (option item).
Vibration proof table (option):
1)Integrate 4 vibration pads with Al. or SUS frame to support Aligner
2) Option with the granite plate for Vibration isolation is available.
3) Integrate TMC or New Port vibration proof table with Aligner
- Could integrate auto light shutter Performance:
Production speed : 2~4 pcs/minutes
With Vacuum hard contact: the printing resolution could be from 1.0 (NUV) and 0.5um (DUV)
With proximity mode: the printing resolution is 2~5um]
Other then Standard system, We could build up Customized system for you!!
科毅科技
公司位置:桃園市-楊梅區
統一編號:27285346
聯絡人:林憲維
電話:03-4852036
手機:0935267249
服務時間:每週一到週五 08:30AM-18:00PM
相關產品
-
光罩對準曝光機
AG Mask Aligner Specification
-
相關詢價
-
詢價 手提乾式變壓器 A級 3KVA 單相 220-110V 271A *1pc
來自:東OO料OO有OO司 詢價
***ychen@tongyow.com.tw
-
大金金典72&28&22三種規格價錢,另外三菱重機和日立冷氣的價錢
來自:孔OO 詢價
***25810@yahoo.com.tw
-
RS485通訊功能多功能數位電錶,電壓440V
來自:永OO調 詢價
***elel@y-hvac.com
https://8607558961983.tw66.com.tw/web/NMD?postId=957229冷冻液超低温冷却机
低温冷冻机的特点:低温型冷冻机(-5- -40度)特点,制冷量大,采用世界名牌进口压缩机,低温性能卓越,可靠耐用,产